Submit a request

Artec Studio 10: System Requirements

This article will assist you in selecting the optimal hardware for your 3D scanning and post-processing needs for Artec Studio 10. A list of general hardware and software requirements can be found further below.

  • Windows 7, 8 or 10 (x64)
  • Artec Studio can be installed on Apple computers
    by using Boot Camp (MacOS is not supported)

Important note: USB 3.1 compatibility is not guaranteed, please use Artec USB Kit

  • min. Intel Core i5 (76xx and later)
  • Intel Core i7
  • Intel Core i9

AMD Ryzen, Threadripper, and Intel Xeon CPUs not supported

  • min. 12 GB for Artec Eva
  • min. 18 GB for Artec Spider

HD mode for Artec Eva and Artec Leo (available in Artec Studio 15.1 and higher)

Graphics/video cards

NVIDIA or AMD card which meets the following requirements:

  • At least 1 GB of video memory
  • NVIDIA GeForce cards are supported starting from the 400 series and up to the 900 series (older, as well as newer GeForce cards, are not supported).
  • Quadro cards are not recommended for Artec Studio 9/10. They may work and deliver acceptable performance after modifying certain parameters in the NVIDIA Control Panel

Recommended NVIDIA drivers:



358.50 354.42

Intel GPU cards:

  • Regular 3D scanning (i.e. without real-time fusion) will work on Intel cards. However, an Intel video card will provide slower 3D-rendering compared to an NVIDIA or AMD card.
  • 3D scanning in real-time fusion mode is not supported.
  • The texture mapping algorithm is not supported.


Not supported:

  • OS: Windows XP, Windows Vista, Mac OS, any 32-bit OS, Windows 11
  • Virtual Environments (Windows OS installed inside a Virtual Machine) are not supported
  • Graphics/video cards: AMD FirePro M6100 Fire GL V, Intel HD 4600
  • CPUs: Intel Core i7 8550U, Intel Core i5 8350U, Intel Core i7-1065G7 with integrated graphics

In case you experience any issues with your Artec 3D scanner or require technical assistance with your device or Artec Studio, in the first instance please contact your local Artec dealer/distributor directly. You can also contact the Artec Support Team by clicking on "Submit a request" button on the bottom right part of the screen or by emailing

Was this article helpful?
1 out of 1 found this helpful