Submit a request
Follow

Artec Studio 19: System Requirements

This article will assist you in selecting the optimal hardware for your 3D scanning and post-processing needs for Artec Studio 19.

In Artec Studio 19 some algorithms were tuned.

 

Some scanners/features have specific system requirements, please refer to:

Artec Spider II System Requirements

Artec Point System Requirements

AI Photogrammetry System Requirements

 

OS

  • Windows 8.1, 10 (x64), Windows 11

  • Windows 10 (x64) and later is required for Artec Micro I/Micro II, Point scanners

  • MacOS is not supported

  • Virtual Environments are not supported

Graphics/video

cards

No HD reconstruction (Artec Eva Lite/ Artec Space Spider, Artec Ray I, Artec Ray II)

Minimal: Full support of OpenGL 4.6
Recommended: Full support of OpenGL 4.6, Non-Intel GPU

For HD reconstruction (NVIDA GPU ONLY)  Artec Eva, Artec Leo

Minimal: NVidia GPU Pascal architecture or newer(CUDA Compute Capability >= 6.1), GPU memory >= 4GB

Recommended: NVidia GPU Turing architecture or newer(CUDA Compute Capability >= 7.5), GPU memory >= 4GB

 

AI Photogrammetry:

Minimal: NVidia GPU Turing architecture or newer(CUDA Compute Capability >= 7.5), GPU memory >= 6GB

Recommended: NVidia GPU Ampere architecture or newer (CUDA Compute Capability >= 7.5), GPU memory >= 8 GB

 

For Artec Micro I and Artec Micro II

Minimal: NVidia GPU Turing architecture or newer(CUDA Compute Capability >= 7.5), GPU memory >= 4GB

Recommended: NVidia GPU Turing architecture or newer(CUDA Compute Capability >= 7.5), GPU memory >= 8 GB

CPU

  • min. Intel Core i5 (76xx and later)

  • Intel Core i7 (7xxx and later), for Artec Spider II 12xxx and later

  • Intel Core i9 (7xxx and later), for Artec Spider II 12xxx and later

  • AMD Ryzen, Threadripper, and Intel Xeon CPUs (not supported by Artec Spider II)

RAM

  • min. 16 GB for Artec Eva (SD mode) & Artec Spider

  • min. 32 GB for Artec Eva (HD mode), Artec Leo, Artec Micro I and Artec Micro II, Artec Spider II, Artec Ray I and Artec Ray II (64 GB+ highly recommended)

     

USB

  • Artec Eva, Artec Eva Lite, Artec Spider and Artec Space Spider: 1 x USB 2.0 port (type A).
    (USB 3.0 and 3.1 compatibility information)

  • Artec Micro I  & Artec Micro II: 1x USB 3.0 or 3.1 port (type A)
    The Artec Micro will not work with a USB 2.0 port

  • Artec Ray I: 1x USB 2.0, 3.0, or 3.1 port (type A)

Important note: USB 3.1/3.2 compatibility is not guaranteed, please use Artec USB Kit

Not supported:

  • OS: Windows XP, Windows Vista, Windows 7, Windows 8, Mac OS, any 32-bit OS

  • Virtual Environments (Windows OS installed inside a Virtual Machine)

  • CPUs: Intel Core i7 8550U, Intel Core i5 8350U, Intel Core i7-1065G7 with integrated GPU

(!) If the graphics card does not meet the minimum requirements (or an outdated graphics driver is installed), the HD reconstruction algorithm will fail.

 

  • (!) HD reconstruction for Artec Eva scans does not work on the following GPUs:

    NVIDIA Quadro T1000

    (!) HD reconstruction for Artec Leo scans does not work on the following GPUs:

    NVIDIA Quadro T1000/ T2000

    NVIDIA Quadro P1000

 

 

 

In case you experience any issues with your Artec 3D scanner or require technical assistance with your device or Artec Studio, in the first instance please contact your local Artec dealer/distributor directly. You can also contact the Artec Support Team by clicking on "Submit a request" button on the bottom right part of the screen or by emailing support@artec3d.com

Was this article helpful?
0 out of 1 found this helpful