Submit a request
Follow

The Artec battery: an optimal solution for Artec 3D scanners

 

Artec’s special battery pack makes it possible to scan faster and easier than ever before,eliminating the need to be near a power source, and giving you absolute freedom to scan absolutely anywhere.

 

There are 2 types of the batteries:

NEW Battery Pack:

mceclip1.png

 

 

Specifications:

  • Up to 7 hours of continuous scanning
  • Type of battery: Lithium Battery
  • Capacity: 20100 mAh/73 Whr
  • Cycle time:  ≥500times
  • Input Interface:

mceclip0.png

Mic USB: 5V                   

NB: 13-20V/30W(MAX)

  • Output Interface:

USB1: 5V/2.1A                                         

USB2: QC2.0 5V-12V/18W(MAX)             

NB:12V/5A

 

  • Charging full time ~2.5 hours

Dimension: 174 mm x 78 mm x21.5 mm

Weight: 434.5 g

FC/ CE/ RoHS certificates

 

Compatible scanners:

  • Eva / Eva Lite
  • Spider / Space Spider
  • L2
  • MHT (T2 series)
  • MH (W2 series)

How to use:

(!) Before you start using this battery, please fully charge it. Then plug the cable first into the battery and then into the scanner.

The monitor displays the current battery charge status.

 

NB port is used for charging with the supplied Artec Battery charger or connect Artec Scanner with supplied Artec cable.

Mic USB port please use only if you have a 5A charger and a cable  (not included with battery pack). YOu can charge the battery with this port.

USB1/USB2 port can be used to charge other devices with the correct voltage. Please do not connect your Artec Scanner via these ports.

 

Transport information of the Artec battery:

This report applies to transportation of by air or by sea or by road.

The battery has passed the test Section 38.3 of Recommendations on the Transport of Dangerous Goods, Manual of Test and Criteria. Report No.: WTX22D04066556B001

The transportation of lithium cells and batteries is regulated by the International Civil Aviation Organization, International Air Transport Association, International Maritime Dangerous Goods Code.

When shipped by air, package should according to packing instruction 965~967 of IATA DGR 63rd Edition for transportation.

When shipped by sea, package should according to special provision 188 of IMDG CODE 40-20 Edition for transportation.

When shipped by road, package should according to special provision 188 of European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) for transportation.

 

Please check more information here

 

Warranty:

Click here for warranty information

 

 

OLD Battery Pack:

mceclip0.png

Specifications:

  • Up to 6 hours of continuous scanning
  • Type of battery: Lithium Battery
  • Capacity: 16000 mAh/59.2 Whr
  • Cycle time:  ≥500times
  • Charging full time ~2.5 hours

Dimension: 185 mm x 125 mm x 15 mm

For more information please check Artec Battery Leaflet.

 

Compatible scanners:

  • Eva / Eva Lite
  • Spider / Space Spider
  • L2
  • MHT (T2 series)
  • MH (W2 series)

How to use:

image.png

 

Transport information of the Artec battery:

The battery has passed the tests and it is safe to bring it in hand luggage.  Please check more information here

 

Warranty:

Click here for warranty information

 

 

In case you experience any issues with your Artec 3D scanner or require technical assistance with your device or Artec Studio, in the first instance please contact your local Artec dealer/distributor directly. You can also contact the Artec Support Team by clicking on "Submit a request" button on the bottom right part of the screen or by emailing support@artec3d.com

 

Was this article helpful?
0 out of 0 found this helpful