Submit a request

Artec Leo Protective Case


General Information:

Artec Leo Protective Case made from medical-grade silicone* certified by leading regulators like the USA’s FDA and Germany’s LFGB, the material has also been deemed hazardous substance-safe by the EU’s RoHS, and undergone ISO testing to give users full peace of mind, meeting standards on skin contact, oral toxicity, cytotoxicity, and blood contamination.

*The silicone is made from Wynca XHG-6920, a material with certificates for ISO 10993-4, ISO 10993-5, ISO 10993-10, ISO 10993-11, USP<88> class VI, LFGB, FDA, RoHS.


Artec Leo Protective Case was designed specifically for forensics and medical applications (keeping a  place of work free from contamination or any interference). It protects the device from dirt, dust, general wear and tear and can be used in daily work with the scanner. Artec Leo Protective case can either be washed, wiped off, or thoroughly disinfected.


H×D×W: 231 × 162 × 230 mm

650 grams (plus weight of Leo: 2.6 kg)


Designed for Artec Leo Scanner.


How to put on the Artec Leo Protective Case:

It fits snugly over Artec Leo scanner protecting it from dust and dirt, and general wear and tear.

If you would like to purchase the accessory or have any questions please get in touch with


(!) With Artec Leo Protective case you will get 3 pieces to close all air vents. These pieces are used to protect the device from moisture when it is necessary to disinfect the scanner without taking off Artec Leo protective case. Please do not close the air vents  during the scanning as the device will overheat within ~10 minutes and power off.


(!) In order to properly store Artec Leo in the standard hard case, it is necessary to remove Artec Leo Protective Case beforehand. The standard hard case was not designed to accommodate the scanner with the protective case attached.

Alternatively, if you prefer to keep Artec Leo Protective Case on while storing the scanner, we recommend considering to customize a hard case that can accommodate both the scanner and the protective case.


In case you experience any issues with your Artec 3D scanner or require technical assistance with your device or Artec Studio, in the first instance please contact your local Artec dealer/distributor directly. You can also contact the Artec Support Team by clicking on "Submit a request" button on the bottom right part of the screen or by emailing

Was this article helpful?
0 out of 0 found this helpful